32
Troubleshooting
EpsonNet Setup was unable to find my printer on the network
1. If you see a screen like this one, do one of the following:
■ If you connected the printer wirelessly, verify that the printer is turned on
and the green WiFi light on the printer’s control panel is on. Select
Wi-Fi
setup using the printer’s control panel
, then click
Next
.
■ If you connected the printer to your network with an Ethernet network
cable, verify that the printer is turned on and connected to your network.
Select
Wired Network (Ethernet) setup
, then click
Next
.
■ If you created an Ad-Hoc wireless connection, do one of the following:
■
For Windows users:
If your computer is connected to a network
with an Ethernet cable, disconnect it. When setup is complete,
reconnect your computer’s Ethernet cable.
■
For Macintosh users:
If your computer is connected to a network
with an Ethernet cable, you cannot set up your printer this way. See
page 4 or page 22 to set up your printer.
■ If you’re switching from a wireless to a wired network connection, you
need to disable the wireless adapter using the printer’s control panel. Press
the
F
Setup
button on the printer’s control panel, select
Network
Settings
>
Wireless LAN Setup
>
Advanced Setup
>
Disable
Wireless LAN
. Select
Yes
, then press
OK
.
2. Continue clicking
Next
until EpsonNet Setup begins to search for your
printer. Then continue with step 9 on page 25.
Network Guide_R1.fm Page 32 Wednesday, April 8, 2009 2:37 PM
To Next Page
Loading...
