62
EN
Fax Menu List
Liste de menus Fax
Fax Menüliste
Faxmenu's
EN
R & 62
Press x again to finish setting.
Menu items and values may differ depending on the region.
Quality *¹ Standard, Fine, Photo
Contrast *¹ -4 to +4
Send Fax Later Off, On
Fax Mode Sending, Polling
Fax Settings Print Report Fax Log *², Last
Transmission *³, Speed
Dial List, Group Dial
List, Reprint Faxes *⁴,
Protocol Trace *⁵
Speed Dial Setup Create, Edit, Delete
Group Dial Setup Create, Edit, Delete
Send/Receive
Setup
Quality, Contrast, Auto
Reduction *⁶, Last
Transmission Report *⁷
Communication DRD *⁸, ECM *⁹, V.34 *¹⁰,
Rings to Answer *¹¹,
Dial Tone Detection *¹²,
Dial Mode *¹³
Check Fax Connection
Header Fax Header, Your
Phone Number
Restore Default
Settings
R & 32
Wi-Fi Settings See your online Network Guide for details.
File Sharing Setup USB, Wi-Fi
Maintenance
R & 76
x Fax settings menu
*1 Settings for transmitted faxes.
*2 Prints or displays the communication log.
*3 Prints a communication log for the previous transmission
or the previous polling results received.
*4 Reprints from the latest fax received. When the memory
is full, the oldest faxes are erased first.
*5 Prints the protocol for the latest communication.
*6 Indicates whether or not to reduce received faxes larger than
A4-size to A4, or prints them at their original size on multiple
sheets.
*7 Indicates whether or not to print a report for the previous
transmitted fax. Select On Error to print reports only when
an error occurs. Select On Send to print reports for every fax.
*8 Indicates the type of answer ring pattern you want to use
to receive faxes. To select an option other than
All (or Off),
you must set up your phone system to use different
ring patterns. This option may be On/Off depending
on the region.
*9 Indicates whether or not to use Error Correction mode
to automatically correct fax data sent/received with errors
due to the line or any other problems. Color faxes cannot
be sent/received when ECM is off.
*10 Indicates the speed at which you transmit and receive faxes.
On is 33.6 kbps and Off is 14.4 kbps.
*11 Depending on the region, this setting may not be displayed.
*12 When this is set to
On, the product starts dialing after it
detects a dial tone. It may not be able to detect a dial tone
when a PBX (Private Branch Exchange) or a TA (Terminal
Adapter) is connected. In that case, set to Off. However,
doing so may drop the first digit of a fax number and send
the fax to the wrong number.
*13 Indicates the type of phone system to which this product
is connected. Depending on the region, this menu may
not be displayed.
FR
R & 63
DE
R & 64
NL
R & 65
To Next Page
Loading...
