Installing Your Printer Software
59
Installing Printer Software on
Windows 2000
1. Make sure your printer is set up, connected to your printer, and turned on, as
described on the Start Here sheet.
2. Turn on your computer.
3. Wait for Windows to detect your printer
connection and display a screen like this:
Don’t click any buttons on the screen yet.
Note: If this screen doesn’t appear, make sure
your printer is turned on and connected.
4. Put the EPSON CD-ROM in your
CD-ROM or DVD drive and wait a few
seconds for the CD-ROM to be recognized.
5. Click
Next
at the Found New Hardware Wizard screen.
6. Click the
Search for
option, then click
Next
.
7. Click
CD-ROM drives
, then click
Next
.
8. At the next screen, click
Next
.
To Next Page
Loading...
