12 Printing From Start to Finish
Follow these guidelines when loading paper:
■ Load the printable side face-up. It’s often brighter or whiter.
■ Load letterhead or preprinted paper into the printer top edge first.
■ Always load the short edge first, even when printing in landscape mode.
■ Don’t load paper above the arrow on the left edge guide.
■ If you’re using special paper, follow the instructions that came with it.
Loading Envelopes
1. Open the output tray and its extension.
2. Insert up to 10 envelopes at a time, flap edge left, printable side up, against
the right edge of the sheet feeder.
3. Slide the left edge guide against the envelopes (but not too tightly).
Note:
For the best results, press each envelope flat before loading, or load one envelope
at a time.
Select the following settings when printing on envelopes:
■ Plain paper as the Type (Windows) or Media Type (Macintosh) setting
■ The envelope size as the Size (Windows) or Paper Size (Macintosh) setting
■ Landscape as the Orientation setting
To Next Page
Loading...
