20 Printing From Start to Finish
Printing with Macintosh OS 8.6 to 9.x
Before you begin, make sure you selected your printer in the Chooser as described
on the Start Here sheet.
1. From the File menu, select Page Setup. Select the following settings:
2. Click
OK to close the Page Setup window.
3. From the File menu, select
Print.
4. Select the following print settings as necessary:
Note:
For more information about printer settings, click the ? button.
The Quality setting on this screen gives you the best combination of quality and
print speed for most prints. For the highest print quality (Photo RPM) on selected
papers, click Custom, then click the Advanced button, then see “Customizing
Macintosh Print Settings” on page 25 for instructions on selecting Photo RPM.
Make sure you see SP R200 Series
Select your paper size
Select your document
or image orientation
Select higher quality or faster printing (if available)
Select the type of
paper you’re using
Select Automatic mode
Select Color or
Black ink
To Next Page
Loading...
