40 Printing From Start to Finish
Macintosh OS 8.6 to 9.x
1. Open the File menu and select
Page Setup.
2. Make sure
SP R200 appears at the
top of the screen and these settings
are selected:
■ A4 as the Paper Size
■ Manual Feed as the Source
3. Click
OK.
4. Open the File menu and select
Print.
5. Select
CD/DVD as the Media Type
setting.
6. Click
Print. The printer prints your
CD and ejects it on the tray.
Note:
After you print, handle the CD or DVD
carefully. To allow the ink to dry, wait
at least 24 hours before playing the
disc or inserting it in a drive. Keep
printed discs away from moisture and
direct sunlight.
If you need to adjust the print position or color, see “Adjusting the Print
Position” on page 41 or “Adjusting the Print Density” on page 45.
To Next Page
Loading...
