58 Maintaining Your Printer
6. Select one square each for rows 1 to 4, then enter the number of the best
square in the corresponding boxes on the screen. Then click
Next.
If you can’t find a square without visible bands, choose the one that’s best.
Then click
Realignment to print another test page and repeat this step.
7. After you click
Next, follow the instructions on the screen to print the next
test page.
You see a window like this one:
8. On the test page, select the square without any visible bands. You may need to
use a magnifying glass or loupe.
9. Select one square each for rows 1 to 4, then enter the number of the best
square in the corresponding boxes on the screen. Then click
Finish.
If you can’t find a square without visible bands, choose the one that’s best.
Then click Realignment to print another test page and repeat this step.
To Next Page
Loading...
