Epson Stylus Photo R2400
6 - Epson Stylus Photo R2400 2/05
Caution: Don’t open Epson Status Monitor or respond to any ink
messages when your printer is printing. This may cause your
printer to pause and leave an uneven surface on your printout. If
your ink is running low, wait until printing finishes before checking
ink levels or attempting to replace a cartridge. If you must replace
an ink cartridge in the middle of a print job, the quality of your
printout may decline. For best results, check your ink levels and
replace ink cartridges, if necessary, before printing.
Checking the Ink Supply
To check your ink supply, do one of the following:
❏ Windows: Double-click the icon on the Windows
taskbar.
❏ Mac OS X: Choose
Applications > EPSON Printer Utility
> SP R2400 > EPSON StatusMonitor
.
You see a window like this:
Click a cartridge image to display information about the
cartridge (Macintosh), or click
Information (Windows).
Purchasing Ink Cartridges
Use these Epson ink cartridges within six months of installing
them and before the expiration date on the package:
Caution: To ensure good results, use genuine Epson ink cartridges
and do not refill them. Other products may cause damage to your
printer not covered by Epson’s warranty.
You can purchase ink cartridges, paper, manuals, and
accessories from the Epson Store at (800) 873-7766 or visit
http://www.epsonstore.com (U.S. sales only). In Canada,
please call (800) 463-7766 for dealer referral.
Ink Cartridge Precautions
WARNING: Keep ink cartridges out of the reach of children; don’t
drink the ink.
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets in your eyes, flush them thoroughly with water.
Caution: To avoid damaging the printer, never move the print head
by hand.
You cannot print if an ink cartridge is empty. Leave the empty
cartridge installed in the printer until you have obtained a
replacement. Otherwise the ink remaining in the print head nozzles
may dry out.
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once
you start replacing a cartridge, you must complete all the steps
in one session.
You can replace a cartridge whether the red H ink light is off,
flashing, or on.
1. Make sure the printer is turned on (the green P power light
should be on, but not flashing). Then open the printer
cover.
2. Press the H ink button.
The print head moves and the green P power light flashes.
If a red ink light is flashing or on (indicating a low or empty
cartridge), the cartridge(s) indicated beneath the light(s)
needs to be replaced.
3. Lift up the cartridge cover.
4. Press in the tab on the back of the cartridge, lift it out of the
printer, and dispose of it carefully.
Ink cartridge Part number
Light Light Black T059920
Light Magenta T059620
Light Cyan T059520
Light Black T059720
Photo Black T059120
Matte Black T059820
Cyan T059220
Magenta T059320
Yellow T059420
To Next Page
Loading...
