Printing on CDs and DVDs 33
4. Make sure
EPSON Stylus Photo R260 Series is selected, then click Print
Position Confirmation Pattern
.
5. Click
Print. The confirmation pattern is printed on the CD or DVD.
6. Remove the CD or DVD and measure the distance from the edge of the hole
to the small cross marks labeled
Top and Right. You’ll need a metric ruler
with millimeters for accurate measurements.
7. Open the File menu, select
Print, then select Adjust Print Position. You see a
screen like this:
8. Click
Enter Values, then input the Top distance (from your measurement) in
the Height (Top) box. Enter the Right distance (from your measurement) in
the Width (Right) box.
9. Click
OK to save the measurements.
To Next Page
Loading...
