42 Maintaining Your Printer
You see a screen like the following:
4. Click
Print or Next. The nozzle check pattern prints:
5. If there are no gaps or lines, click
Finish.
If there are gaps or lines, or the test patterns are faint, click
Clean. Then skip
to step 3 on page 43 to clean the nozzles.
Running the Head Cleaning Utility
1. Make sure the printer is turned on but not printing, and the red H ink light is
off. (If the red H ink light is flashing or on, you need to replace a cartridge; see
page 44 for details.)
2. Do one of the following:
■ Windows: Right-click the printer icon on your taskbar (in the lower
right corner of your screen). Select
Head Cleaning.
Print head does
not need to be
cleaned:
Print head needs
to be cleaned:
To Next Page
Loading...
