Epson Stylus Photo R340 - Page 45

EPSON Stylus Photo R340/350 Revision A
Disassembly and Assembly Disassembly 45
 Reattaching the Card Slot Cover Spring
z Insert the shorter leg of the spring into the groove of the
upper guide pin ( ) of the Card Slot Cover, and secure the
longer leg of the spring by the hooked tab ( ) on the Right
Housing.
Figure 2-6. Reattaching the Card Slot Cover Spring
 Reinstalling the Right Housing
z Make sure there is no gap between the Right Housing and
the Upper Housing.
Figure 2-7. Reinstalling the Right Housing
Longer Leg
1
2
Hooked Tab
Groove on the Guide Pin
Right Housing (inside)
Upper Housing
Should be
No Gap