Epson Stylus Photo R340 - Page 97

EPSON Stylus Photo R340/350 Revision A
Disassembly and Assembly Disassembly 97
 Reattaching the Rear Paper Guide which has become detached
z Insert the both ends of the Torsion Spring 21.2 of the Rear
Paper Guide into the holes ( ) of the Main Frame.
Figure 2-98. Reattaching the Rear Paper Guide
 Reinstalling the PF Roller Assy.
z Set the guide pins of the Left/Right PF Roller Bushings into
the positioning holes.
Figure 2-99. Reinstalling the Left/Right PF Roller Bushings
A D J U S T M E N T
R E Q U I R E D
 Whenever any one of the following parts are replaced, be sure to
apply proper amount of the specified oil to them. (See Chapter 4
for details on the lubrication.)
z PF Roller Assy.
z PF Grounding Spring
Torsion Spring 21.2
Holes
Rear Side of the Printer
Guide PinGuide Pin