Scanning a Photo to a Memory Card 107
9. Use the buttons next to the LCD screen to select the following options:
■ Graphic for the document type
■ Photo for the image quality
■ Auto for the scan area; if the
edges of the photo are light in
color, select
Max. for the scan
area
10. Press the
OK button. You see a
message on the LCD screen
instructing you to place your original
on the scanner glass and press the
x
Color button.
11. Press the x
Color button. The photo is scanned to the epscan folder on your
memory card. Wait for scanning to finish, then remove the card.
Caution:
Never open the scanner unit while scanning or copying, or you could damage the
RX500.
Graphic
Photo
Auto
OK
Document type
Image quality
Scan area
Click OK
To Next Page
Loading...
