24 Copying
To cancel a copy job in progress, press the y Stop button. Canceling appears on
the LCD screen and your page is ejected.
Changing the Copy Layout
The RX500 offers you several layouts for copying.
1. Press the
Menu button to display the Copy Menu on the LCD screen.
Note:
This menu is only available in Copy mode. If you don’t see Copy Menu on the
screen, press the Copy button, then press the Menu button.
2. Press the OK button. You see this
screen:
3. Press the bottom left button (next to
Standard) to select one of the
options in the table below.
4. After you choose your copy layout, press
OK.
Copy Layout setting Result
Standard
Copies your original with a standard
0.12-inch (3 mm) margin
BorderFree*
Sizes your original as necessary to fit
to the edges of 4 x 6-, 5 x 7-, or
8 x 10-inch paper**
Min Margins
Copies your original with a 0.06-inch
(1.5 mm) border around the edges
Copy Layout
1.Standard
Press to select layout options
To Next Page
Loading...
