Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C
DISASSEMBLY AND ASSEMBLY Removal of Exterior Parts 64
Confidential
4.2 Removal of Exterior Parts
4.2.1 Paper Support Assy
Parts/Components need to be removed in advance: None
Removal procedure
1. Open the Paper Support Assy.
2. Push the bushing of the ASF Unit (left side) in the direction of the arrow to release
the dowel of the Paper Support Assy, and then remove the Paper Support Assy
with disengaging the Edge Guides.
Figure 4-4. Removing the Paper Support Assy
4.2.2 Stacker Cover
Parts/Components need to be removed in advance: None
Removal procedure
1. Pull the Stacker Cover forward to open it.
2. Release the dowels (x2) that secure the Stacker Cover, and remove the Stacker
Cover from the Lower Housing.
Figure 4-6. Removing the Stacker Cover
When assembling the Paper Support Assy, align the hole with the
protrusion of the Edge Guide on the left end, and engage the
dowels of the Paper Support Assy in the order shown below.
Figure 4-5. Installing the Paper Support Assy
To Next Page
Loading...
