3-87
Printing with Epson Drivers for Macintosh | 87
Choosing Color Management Options
Follow these instructions to use color management in the printer driver.
1. Select
Printer Color Management from the drop-down menu, then
click
Advanced Settings. You see this screen:
2. Select one of the following settings:
• Color Controls to choose from four Color Adjustment modes and
from three Gamma settings. Click the arrow next to
Advanced
Settings
to specify individual values for brightness, contrast,
saturation, and CMY inks.
• ColorSync for mapping colors to your printer’s profile. In most
cases, you will get better results by applying color management in
your application, rather than in the printer driver. If you choose this
setting, you can choose ColorSync from the drop-down menu and
choose filters or other settings.
• (Off) No Color Adjustment to disable color management in the
printer driver. Choose this mode when you use a color-managed
ICC workflow in Photoshop or other software applications.
7800-9800Guide.book Page 87 Monday, April 10, 2006 11:59 AM
To Next Page
Loading...
