52 Printing with Windows
Normal Cut
Select this setting to keep margins at the top and bottom of the
printed data.
Off
Select this setting to cut printouts manually. To cut printouts
manually, follow the steps below.
Note:
When you print on Canvas, only this setting is available.
1. Press the Paper Source l button to select Roll Auto Cut Off
.
2. Press the Enter button.
3. The printer automatically feeds the paper to the cutter guide,
and the printer becomes offline. Pause appears on the LCD.
4. If necessary, adjust the cutting position by using the Paper
Feed d button or Paper Feed u button.
5. Cut the paper along the cutter guide using the manual cutter
unit.
To Next Page
Loading...
