18 | Control Panel Lights
Control Panel Lights
Status of High Heat and Low Heat lights when the printer is in a READY or WARMING UP state:
Status of
High Heat and Low Heat lights when selecting a preset temperature for a heater (currently
selected heater type is indicated on the control panel):
Light Description
P Power On: printer is turned on
Flashing: printer is processing or printing a print job, performing a cleaning operation,
warming up, or shutting down
Off: printer is turned off
Pause On: printer is paused or in menu mode
Check
b paper On: no media is loaded, media is out, or the paper lever is in the Released position
Flashing: media is jammed, almost out, loaded crooked, or there is another error condition
Check H ink On: an ink cartridge is expended, not installed, or not compatible with the printer
Flashing: an ink cartridge is nearly expended
High Heat See the next two tables for descriptions
Low Heat
Error alert lamp Flashing: an error has occurred
High Heat
light
Low Heat
light
Description
On On All three heaters have reached their preset temperature
Flashing Off At least one of the heaters is warming up to its preset temperature
Flashing Flashing A heater error has occurred
Off Off All three heaters are turned off
High Heat
light
Low Heat
light
Description
On On You can select a higher or lower temperature than the current setting
On Off You can select only a higher temperature than the current setting
Off On You can select only a lower temperature than the current setting
To Next Page
Loading...
