22 | Paper Setup Option Summary
PLATEN HEATER OFF Sets the temperature of the heater beneath the print
head that warms the ink; see your media
instructions
30°C to 50°C
(86 °F to 122 °F)
POST HEATER OFF Sets the temperature of the heater that dries the
printout; see your media instructions
30°C to 50°C
(86 °F to 122 °F)
M/W ADJUSTMENT
(MicroWeave
®
)
LOW A to B Minimizes the affect of the MicroWeave adjustment
MEDIUM A to D Prints areas between print head passes with a wave
form pattern
HIGH A to D Prints like MEDIUM, but slower to improve print
quality
EXTRA HIGH A to B Prints like HIGH, but only on half of the print head
nozzles
PAPER SUCTION HIGH Adjusts the suction pressure used when feeding the
media; see your media instructions
LOW
DRYING TIME 0.0sec to 10.0sec Selects a drying time for ink to avoid smearing
CARRIAGE MOVEMENT DATA WIDTH Moves the print head to the width of the print data
PRINTER FULL WIDTH Moves the print head to the maximum width
PRINT MULTIPLE LAYER OFF Sets printing to overwrite lines a select number of
times (also called “multiple hit”)
2 to 8
Option Parameters Description
Platen Heater
Post Heater
To Next Page
Loading...
