4 | Loading Media in the Epson Stylus
®
Pro GS6000
Using the Auto Take-Up Reel
Make sure you have placed an empty media core on the Auto Take-Up Reel scroller bar.
1. Make sure the AUTO TAKE-UP REEL setting is set to ON in the PRINTER SETUP menu.
See page 19.
2. Turn on the Auto Take-Up Reel, and set the switch on the top of the reel controller to OFF.
3. Move the paper lever to the Released position.
4. If the media is not in the center of the empty take-up core, turn the adjustment knob clockwise to
move the core left, or counter-clockwise to move the core right.
AC
inlet
Empty take-up
core
Horizontal
adjustment
knob
To Next Page
Loading...
