Setting Options Description
Nozzle Check — Select to run the nozzle check utility
and inspect the printed pattern to
determine if you need to clean the print
head
Head Cleaning Selected Nozzles or All Select to run the head cleaning utility
Nozzles on either selected nozzles indicated on
the nozzle check print pattern
Execute (Light)
(Selected Nozzles) or on all nozzles
Execute (Medium)
(All Nozzles)
Execute (Heavy)
Execute (Light): run this level of
cleaning first
Execute (Medium): run this level of
cleaning if the light level of cleaning left
faint or missing ink in your printouts
Execute (Heavy): run this level of
cleaning if the light and medium levels
of cleaning still left faint or missing ink
in your printouts
Tube Washing White Ink (White Edition) Select to run the tube washing utility to
remove accumulated sediment in the
Color Ink
selected ink tube
Head Cleaning Set Yes Select to move the platen and print
head to the maintenance position
No
before replacing the head cleaning set
Head Cap Cleaning Yes Select to move the platen and print
head to the maintenance position
No
before cleaning the caps
Cleaning Around Head Yes Select to move the platen and print
head to the maintenance position
No
before cleaning around the head
Waste Ink Counter — Select to reset the waste ink counter
after replacing the waste ink bottle
132
To Next Page
Loading...
Need help?
General
