3. Press the right arrow button on the control panel to display the Settings menu.
4. Press the up or down arrow button to highlight Printer Setup, and press the right arrow button.
5. Press the up or down arrow button to highlight Head Alignment, and press the right arrow button.
6. Press the up or down arrow button to highlight the size of the installed platen, and press the right
arrow button.
7. Press the OK button.
8. Confirm that the T-shirt is loaded properly, then press the OK button again.
The check pattern is printed.
Note: The check pattern is printed at the same size as the top surface of the parallel adjustment
plate.
9. Look at the printed check pattern, and choose the pattern number with the least amount of white
space between the lines. For example, in the image here, 5 is the best pattern.
10. When C is displayed on the control panel, press the up or down arrow button to select the best
pattern number, and press the OK button.
If there is no optimum number in the check pattern, select 1 or 13 (whichever is better), and perform
Head Alignment again.
11. Select the best pattern number for all the ink colors and press the OK button when you are finished.
You return to the Standby screen.
73
To Next Page
Loading...
Need help?
General
