Epson SureColor F2000 Series User Manual

are not cleared even after performing head cleaning several times. If this is the case, try washing the
tubes for the target ink.
Before you clean the ink tube, you may want to have new ink and cleaning cartridges handy (in case you
run out of ink) and a new waste ink bottle (if a message prompts you that there is not enough free space
in the current bottle).
Note: If you start the tube washing process and do not have enough cleaning liquid in the cartridges, you
will not be able to use your printer until new cleaning cartridges are installed.
1. Unpack the cleaning cartridges.
2. Turn on the printer.
3. Press the maintenance button.
The Maintenance menu appears.
4. Press the up or down arrow button to highlight Tube Washing, and press the right arrow button.
5. Press the up or down arrow button to highlight White Ink, and press the right arrow button.
Note: If you need to wash the color ink tube to help clear a clogged nozzle, select Color Ink.
6. Press the up or down arrow button to highlight Yes, and press the OK button.
7. Press the OK button again to start washing the tube.
8. Open the left ink cartridge cover.
97

Epson SureColor F2000 Series Specifications

General

Maximum Print Resolution	1440 x 1440 dpi
Maximum Print Size	16" x 20"
Ink Colors	Cyan, Magenta, Yellow, Black, White
Operating System Compatibility	Windows, macOS
Connectivity	USB 2.0, Ethernet
Printer Type	Direct-to-Garment
Ink Configuration	CMYK + White
Media Width	Up to 16 inches
Operating Temperature	59° to 95°F (15° to 35°C)
Operating Humidity	20% to 80%
Print Technology	Epson PrecisionCore® TFP® Print Head