10 | Using cut sheets
Using cut sheets
You can print on many types of cut sheet paper and other media. The printer accepts sheets in widths from
7.2 inches (18 cm) to 24 inches (61 cm) for the SC-P6000/P7000 or 44 inches (112 cm) for the
SC-P8000/SC-P9000.
You can leave your roll paper in the printer when you print on cut sheets; make sure it is removed from the
paper path and rolled up.
How you load the paper depends on its thickness:
• For media thinner than 19 mil (0.5 mm), see the section below.
• For media thicker than 19 mil (0.5 mm), see page 11.
Loading cut sheets
Make sure you load paper in the portrait orientation (short edge first).
You can load most photo and fine art sheet papers up to 19mil (0.5 mm) thick without pressing the
button.
1. Make sure the printer is turned on and the roll paper cover is closed.
2. Press the l button, then select Cut Sheet from the Paper Source menu.
To Next Page
Loading...
