Epson SureColor SC-P5300 - Print Settings for Server; Client Connection

❏ Server / client connection : Set the port on the server computer
For the server / client connection, explain how to set the port manually.
❏ Peer to peer connection : Set the port on each computer
For peer to peer connection, explain how to set the port automatically using the installer available from the
soware disc or Epson's website.
Print Settings for Server / Client Connection
Enable to print from the printer that is connected as the server / client connection.
For the server / client connection, set up the print server
rst,
and then share the printer on the network.
When using the USB cable to connect to the server, also set the print server rst, and then share the printer on the
network.
Setting Up the Network Ports
Create the print queue for network printing on the print server by using standard TCP/IP, and then set the network
port.
is example is when using Windows 2012 R2.
1. Open the devices and printers screen.
Desktop > Settings > Control Panel > Hardware and Sound or Hardware > Devices and Printers.
2. Add a printer.
Click Add printer, and then select e printer that I want isn't listed.
3. Add a local printer.
Select Add a local printer or network printer with manual settings, and then click Next.
4. Select Create a new port, select Standard TCP/IP Port as the Port Type, and then click Next.
Administrator's Guide
Function Settings
24