Epson SureColor SC-P5300 - Password and Printer Sharing Issues

❏ IP address entered to web browser when running Web Cong
For Self-signed Certicate, change the printer name. e certicate is updated and the printer can be connected.
For CA-signed Certicate, take the certicate again for the printer.
The proxy server setting of local address is not set to web browser.
When the printer is set to use a proxy server, congure the web browser not to connect to the local address via the
proxy server.
❏ Wi n d o w s :
Select Control Panel > Network and Internet > Internet Options > Connections > LAN settings > Proxy
server, and then congure not to use the proxy server for LAN (local addresses).
❏ Mac OS:
Select System Preferences > Network > Advanced > Proxies, and then register the local address for Bypass
proxy settings for these Hosts & Domains.
Example:
192.168.1.*: Local address 192.168.1.XXX, subnet mask 255.255.255.0
192.168.*.*: Local address 192.168.XXX.XXX, subnet mask 255.255.0.0
Related Information
& “Accessing Web Cong” on page 23
& “Assigning the IP Address” on page 19
Forgotten the Administrator Password
If you forget your administrator password, contact your dealer or Epson Support.
Issues when Sharing Printers
The Shared Server is Slow
Follow the steps below if operations are slow on shared printers.
1. On the print server computer, select Control Panel > Devices and Printers.
2. Right-click the printer icon (print queue) you want to share, select Printer properties > General tab, and then
select Preferences.
3. Select Monitoring Preferences on the Utility tab in the printer driver.
4. Select Allow monitoring of shared printers.
Administrator's Guide
Solving Problems
51