EasyManua.ls Logo

Epson SureColor SC-P5300 - Synchronizing the Date and Time with Time Server

Epson SureColor SC-P5300
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
& “Logging on to the Printer Using Web Cong” on page 35
Synchronizing the Date and Time with Time Server
When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network. e time server may be operated within the organization or published on the Internet.
When using the CA
certicate,
time-related trouble can be prevented by synchronizing with the time server.
1. Access Web Cong and select the Device Management tab > Date and Time > Time Ser ver.
2. Select Use for Use Time Server.
3. Enter the time server address for Time Server Address.
You can use IPv4, IPv6 or FQDN format. Enter 252 characters or less. If you do not specify this, leave it blank.
4. Enter Update Interval (min).
You can set up to 10,080 minutes by the minute.
5. Click OK.
Note:
You can conrm the connection status with the time server on Tim e S e r v e r Stat u s .
Related Information
& “Accessing Web
Cong
” on page 23
& “Logging on to the Printer Using Web Cong” on page 35
Administrator's Guide
Function Settings
30

Table of Contents

Related product manuals