Epson SureColor SC-P5300 - Changing the Administrator Password from the Control Panel

❏ When there is only one label: Use the value of the SERIAL No. shown in (1). In the example shown, this is
"XYZ0123456".
❏ When there are two labels: Use the value of the PASSWORD shown in (2). In the example shown, this is
"03212791".
We recommend changing the initial password aer you start using the printer.
You can change the password through Web Cong, on the control panel, or by using your soware (Epson Device
Admin). When using Epson Device Admin, see the documentation supplied with Epson Device Admin.
Starting Epson Device Admin
“Epson Device Admin” on page 53
Changing the Administrator Password from the Control Panel
You can change the administrator password from the printer's control panel.
1. Select Menu on the printer's control panel.
2. Select General Settings > System Administration > Security Settings.
3. Select Admin Settings.
4. Select Admin Password > Change.
5. Enter the current password.
6. Enter the new password.
7. Enter the password again.
Note:
You can restore the administrator password to the initial password by selecting Restore Default Settings on the Admin
Password screen and entering the administrator password.
Administrator's Guide
Product Security Settings
32