Epson SureColor SC-P5300 - Importing CA-signed Certificates

Importing a CA-signed Certicate
Import the obtained CA-signed Certicate to the printer.
c
Important:
❏ Make sure that the printer’s date and time is set correctly. Certicate may be invalid.
❏ If you obtain a certicate using a CSR created from Web Cong, you can import a certicate one time.
1. Access Web Cong and then select the Network Security tab. Next, select SSL/TLS > Certicate, or IPsec/IP
Filtering > Client Certicate or IEEE802.1X > Client Certicate.
2. Click Import
A certicate importing page is opened.
3. Enter a value for each item. Set CA Certicate 1 and CA Certicate 2 when verifying the path of the
certicate on the web browser that accesses the printer.
Depending on where you create a CSR and the
le
format of the
certicate,
required settings may vary. Enter
values to required items according to the following.
❏ A certicate of the PEM/DER format obtained from Web Cong
❏ Private Key: Do not
congure
because the printer contains a private key.
❏ Password: Do not congure.
❏ CA Certicate 1/CA Certicate 2: Optional
❏ A certicate of the PEM/DER format obtained from a computer
❏ Private Key: You need to set.
❏ Password: Do not congure.
❏ CA
Certicate
1/CA
Certicate
2: Optional
❏ A
certicate
of the PKCS#12 format obtained from a computer
❏ Private Key: Do not congure.
❏ Password: Optional
❏ CA Certicate 1/CA Certicate 2: Do not congure.
4. Click OK.
A completion message is displayed.
Note:
Click Conrm to verify the certicate information.
Related Information
& “Accessing Web Cong” on page 23
&
“Logging on to the Printer Using Web
Cong
” on page 35
& “CA-signed Certicate Importing Setting Items” on page 67
Administrator's Guide
Advanced Security Settings for Enterprise
66