155
You see a screen like this:
5. Do one of the following:
• Select from any displayed frequent contacts.
• Select Keyboard, select the Communication Mode field, and select Network Folder (SMB) or
FTP. Then select the Location field and enter the folder location, and press OK. Enter other
information as necessary.
Enter the folder path name for the Location setting in one of the following formats depending on
the Communication Mode setting you selected:
• SMB: \\host name\folder
• FTP: ftp://host name/folder name
• Select Contacts and choose a saved folder from the Contacts list.
6. Select Scan Settings.
7. Select File Format to choose the file format for your scan.
8. Scroll down and change the File Name setting, if necessary.
9. Select any additional scan settings as necessary.
10. Select Presets to save your scan settings.
Note: Presets can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
To Next Page
Loading...
