220
• Move the product on an even floor surface.
• Lock the casters after the product has been moved.
Caution: Do not move the product with locked casters. Avoid areas with steps or uneven flooring.
Note: If you are transporting or storing the product below 14°F (–10°C), you must discharge the ink.
See the link below for instructions.
9. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product.
10. After the printer is moved, connect the power cable and turn on the printer.
11. Run a print head nozzle check and clean the print head, if necessary.
Discharging Ink
Parent topic: Maintenance and Transportation
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Discharging Ink
If you need to move or transport your product when the temperature is 14°F (–10°C) or lower, you must
first discharge the ink to keep the print head in optimum condition.
Note: The maintenance box needs enough capacity to discharge the ink. Replace the maintenance box
first if the remaining capacity is low.
1. Turn on the product.
2. Remove all the paper from the product.
3. Press the home button, if necessary.
4. Select Settings > Maintenance > Discharging/Charging Ink > Start.
The ink cartridges move to the replacement position.
To Next Page
Loading...
