158
Scanning to Email
You can scan an original and email the scanned file using your product's control panel. You need to
have a preconfigured email server before you can scan to email. You can either enter the email address
directly on the product's control panel or select an address from the Contacts list. Make sure the date
and time are set correctly so the time stamps on your emails are accurate.
Note: You can also use the Scan to Document Capture Pro function to scan and email the scanned file.
1. Load your original into the product for scanning.
2. Press the home button, if necessary.
3. Select Scan.
You see a screen like this:
4. Select Email.
To Next Page
Loading...
