18 TM-C3400 User’s Manual
When Installing Fanfold Paper
❏ When you have used up the fanfold paper (when you install
same type of fanfold paper):
Perform ➀ and ➃.
❏ When you change the paper type:
Perform ➀ ➃.
➀ Removing fanfold paper
1. Remove the paper left on the paper ejection table.
2. When you change the paper type, open the roll paper cover and
the fanfold paper cover to remove the paper.
3. Close the roll paper cover and the fanfold paper cover.
➀ Removing fanfold paper (page 18)
➁ Attaching the paper feed guide (page 19)
➃ Turning on the printer and loading the paper (page 21)
➂ Adjusting the guides (page 19)
To Next Page
Loading...
Need help?
General