Rev. B Wireless LAN Setup Detailed Information A-33
TM-P60 with Peeler Technical Reference Guide
SNMP
Click SNMP; the screen below is displayed. You can confirm the present setting of the SNMP.
❏ Community
A.3.2.2 Configuration
Note:
Even if you change each item with the setting screen of the TMNetWebConfig, the setting contents of the
TM-P60 with Peeler are not updated immediately. Click the SUBMIT button on the setting screen to send
the setting contents to the TM-P60 with Peeler.
When changing each item of the Wireless, TCP/IP, and SNMP, first click the SUBMIT button on the
setting screen. Then all items (Wireless, TCP/IP, and SNMP) are changed on the screen; then reset the
printer or turn the power off and back on again.
Then the setting is effective.
Item Explanation
Read Only The Read Community information is displayed.
Read/Write The Read/Write Community information is displayed.
To Next Page
Loading...
