A-34 Wireless LAN Setup Detailed Information Rev. B
Wireless
Click Wireless; the screen below is displayed. Set the Network Mode, SSID, and WEP.
❏ Wireless Basic Setting
Set the basic setting of the Wireless communication.
Item Explanation
Network Mode Set the network mode of the wireless LAN to either the infrastructure
mode or the Ad-Hoc mode.
SSID Set the Wireless Service Set (SSID) of the print server.
Channel Set the channel to use from the list.
Encryption Set the WEP key to either OFF, WEP 64, or WEP 128.
Encryption Key Select the WEP key from 1-4.
Key 1/2/3/4 Input the WEP key.
When setting the Encryption to WEP 64, always input 10 Hexadecimal
digits. When setting the Encryption to WEP 128, always input 26
Hexadecimal digits.
To Next Page
Loading...
