F-2 Consumable Specifications Rev. B
❏ Take-up roll paper width:
• 58 mm paper width: 58 mm + 0/-1.0 mm
• 60 mm paper width: 60 mm +0/-1.0 mm
❏ Roll paper diameter:
• Maximum 51 mm
❏ Roll paper spool outside diameter:
• 31.4 mm or more
Note:
Paper must not be pasted to the roll paper spool.
❏ Specified roll paper number:
Note:
A specified paper must be used to keep the print quality.
❏ Specified original paper type number: The following original paper can be used for receipts:
TF50KS-E (paper thickness: 65 µm): NIPPON Paper Industries Co.,Ltd.
U.S.A.:
P350 (paper thickness: 62 µm): Kanzaki Specialty Paper (USA)
P310 (paper thickness: 58 µm): Kanzaki Specialty Paper (USA)
P300 (paper thickness: 56 µm): Kanzaki Specialty Paper (USA)
❏ Arrangement of the roll paper end:
• A red line that indicates the paper end (its length is decided by users) is recommended
to be preprinted on the end of the roll paper.
Paper type Label length Paper width (width of the liner)
58 mm 55 mm 29.5 mm
Die-cut label 25mm ETLA058050025 ETLA029050025
51mm ETLA055050051
To Next Page
Loading...
