Rev. B Consumable Specifications F-3
TM-P60 with Peeler Technical Reference Guide
❏ Roll paper end treatment:
• For best print quality and reliability, select the proper print density for the paper type
used. See the table below. Print density can be set with a memory switch.
❏ Requirement for die-cut label and black mark:
Roll Paper No. Original Paper
No.
Density Level
ETLA series - 100%
TF50KS-E 100%
P350 90%
P300, P310 95%
When die-cut labels are used
Paper detection by detecting edge of label
To Next Page
Loading...
