Epson TM-T70II-DT User Manual

3 TM-T70II-DT User’s Manual
❏ Do not use aerosol sprayers containing flammable gas inside or around
this product. Doing so may cause fire.
❏ If water or other liquid spills into this product, immediately unplug the
AC cable, and then contact your dealer or an Epson service center for
advice. Continued use may lead to fire or shock.
❏ Do not allow foreign objects to fall into this product. Penetration by
foreign objects may lead to fire or electric shock.
❏ Never attempt to repair this product yourself. Improper repair work can
be dangerous.
❏ Never disassemble or modify this product. Tampering with this product
may result in injury, fire, or electric shock.
❏ Do not attempt to open or disassemble the internal lithium battery. This
could result in burns or release of hazardous chemicals.
❏ Do not leave the internal lithium battery in a hot place such as near a
fire or a heater because it could overheat and ignite.
CAUTIONS:
❏ Do not use this product in locations subject to high humidity or dust
levels. Excessive humidity and dust may cause paper jams and other
problems, such as fire, or electric shock.
❏ Be sure to set this product on a firm, stable, horizontal surface. The
product may break or cause injury if it falls.
❏ Do not stand on or place heavy objects on top of this product.
Equipment may fall or collapse, causing breakage and possible injury.
❏ Be sure to use this product with the connector cover attached. If it is
not attached, foreign objects may enter this product, causing fire or
equipment damage.
❏ When you move this product, be sure to hold the main body. If you
hold only the connector cover, it may come off and the main body
may break or cause injury if it falls.
❏ The print head can be very hot during and immediately after printing. If
you need to touch it, such as for cleaning, wait until it cools down.
Touching it before that may cause burns.
❏ Be careful of the cutter blades of the printer unit.
❏ Make sure that the total power requirements of all devices receiving
power from this product do not exceed the power supplying capability
of the product. Otherwise, the devices may be damaged.
❏ Connecting an outdoor overhead LAN cable directly to this product
may lead to lightning damage. If you need to connect such a cable to
the product, the cable must be protected against an electrical surge
between the cable and the product. You should avoid connecting the
product to a non-surge protected outdoor overhead LAN cable.
❏ Do not connect a telephone line to the drawer-kick connector of this
product. The telephone line or product may become damaged.
❏ To ensure safety, unplug this product before leaving it for an extended
period.

Epson TM-T70II-DT Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Product color	Black
Maximum roll diameter	83 mm
USB connector	USB Type-A
Serial interface	Yes
Standard interfaces	Ethernet, RS-232, USB 2.0, VGA
Serial interface type	RS-232
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Safety	TUV
RAM capacity	4 GB
Certification	CE, EN55022 Class A
Country of origin	China
Built-in processor	Atom N2800 1.86GHz
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Pallet width	800 mm
Pallet height	2005 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	84 pc(s)
Quantity per pallet (UK)	112 pc(s)
Quantity per pallet layer	12 pc(s)
Quantity per pallet layer (UK)	16 pc(s)
Package depth	275 mm
Package width	237 mm
Package height	265 mm
Package weight	4420 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	290 mm
Width	172 mm
Height	114 mm