Epson TM-T88III - Printer Parts and Configuration; Printer Cover; Cutter Cover; Cover Open Button

Page 2 of 5
2. Gilbarco® G-Site
TM-T88 printers need the correct Dip switch setting and a “Gender Changer” to operate with a G-Site
system.
DIP Switch Settings
DWS1 DWS2
Position
Switch
Setting
1
Off
2
Off
3
Off
4
Off
5
Off
6
Off
7
On
8
Off
Gender Changer Gilbarco # Q13180-50
The Gender Changer is plugged into the back of TMT-88III or TMT-88IV printer. Once firmly seated in
place, tighten both knurled screws.
Position
Switch
Setting
1
Off
2
Off
3
Off
4
Off
5
Off
6
Off
7
Off
8
Off