Page 5 of 5
6. Performing Printer Self-test
Loading Paper Control Panel
A. Load the paper into the printer to perform a printer self-test.
B. While holding down the FEED button on the control panel, turn power “ON” to printer. Release
the feed button once printing has started.
C. The paper out LED starts to flash when printing operation is done.
D. The content of the self-test shows the current status of the printer.
E. To continue the self-test, press the paper feed button again.
F. When the self-test is complete, the final line will read ***completed***
G. The unit will then enter the normal operation mode with all settings initialized.
All product or company’s names, trade names, trademarks, parts numbers and part descriptions may be the trademarks of their
respective owners, and are used for reference or identification purposes only. PMP does not claim any right to or affiliation with such
owners. The PMP product described here is manufactured or remanufactured and sold by PMP and is not the product of any other
identified manufacturer.
To Previous Page
Loading...
Need help?
General