Page 1 of 5
Before installing or working on the printer - We strongly recommend powering down the system when
installing or changing DIP switch settings. The power switch is located on the front of printer right side.
Contents:
Accessing Dip switches .................................................................... Page 1
G-Site ................................................................................................ Page 2
Setting Dip switches
Gender Changer
Passport ........................................................................................... Page 3
Setting Dip switches
Connecting cash drawer
Installing paper ................................................................................ Page 4
Clearing paper jam ........................................................................... Page 4
Printer self-test ................................................................................ Page 5
For the printer to operate correctly, it needs the proper DIP switch settings.
1. Accessing the DIP Switches
Turn the printer on its side and remove the screw from DIP switch cover on bottom of printer.
Set DIP switches using a pointed tool such as a straightened paper clip or a small flat blade
screwdriver.
Power Switch Dip Switch
Cover
To Next Page
Need help?
General