4-4 Reference Information
The illustraton below shows the area that the MICR reader cannot
read.
Paper Specifications
Paper feed method: Friction feed
Paper feed pitch: Default 4.23 mm (1/6”)
0.176 mm (1/144”) can be set by a
command
Paper feed speed:
Approximately 60.3 msec/line
(4.23 mm (1/6”) feeding)
Approximately 86.4 mm/second (3.4
inches/second) (continuous feeding)
[Units: mm ( All the numeric values are typical. )]
Area where recognition is impossible.
45.0
TEST SAMPLE
EPSON
Pay to the
order of
19
$
90-7172/132
3222
9 2 5
Dollars
49.0 (1.93")
To Next Page
Loading...
