TM-U675/U675P User’s Manual 5
English
Opening the Paper Roll Cover
If you open the cover of an autocutter-equipped printer except to
install a paper roll, be sure to follow the steps below to prevent a
paper jam.
1. Feed the roll paper approximately 50 mm.
2. Cut the paper with the manual cutter.
3. Close the cover.
Installing the Paper Roll
Note:
Do not use paper rolls that have the paper glued or taped to the core
because they might cause a paper jam.
You need to install a paper roll even if you are using only the slip or
validation sections of the printer.
with an autocutter
without an autocutter
➀
➁
To Next Page
Loading...
