Epson UB-E04 Reference Guide

11
Chapter 1 Product Overview
1
Product Overview
This chapter describes the features of this product, as well as the parts name and function of each part.
Features
The UB-E04 is an Ethernet interface board for Epson TM printers.
The features of the UB-E04 are as follows:
Ethernet
• 10Base-T, 100Base-TX Ethernet
• Full duplex/half-duplex (Supports auto negotiation)
• Supports Auto-MDIX
Wireless LAN
• You can connect an optional Wireless LAN unit to the USB Type-A connector to support wireless LAN.
• It is IEEE802.11b/g/n (2.4 GHz) compliant.
• It supports infrastructure mode and 802.11 ad hoc mode.
• It also supports WEP (64/128 bit), WPA2-PSK, and WPA2-Enterprise.
Network Function
• It supports TCP/IP protocol.
• It supports DHCP and APIPA.
• It supports ENPC and SNMP. You can use ENPC and SNMP to acquire the printer status.
• It supports IPv4.
Setting
• The settings utility, EpsonNet Config, is available. Please download it from the Epson Web site and use it.
• You can use your Web browser to access EpsonNet Config (Web version) to browse and set network
parameters.
• You can use the push button to initialize the current network parameters or print settings.
CAUTION
Do not connect a device other than the Wireless LAN unit to the USB Type-A
connector.

Epson UB-E04 Specifications

General

Brand	Epson
Model	UB-E04
Category	Computer Hardware
Language	English