37
Chapter 5 Product Specifications
5
• ENPC The network configuration tool (EpsonNet Config) and the dedicated driver
software (such as OPOS/APD) use this to acquire and set the TM printer status.
HTTP/HTTPS
EpsonNet Config (Web version) uses HTTP/HTTPS protocol on the dedicated Web page for acquiring and
changing the UB-E04's network parameters.
Trap Destination Up to 2 destination IP addresses can be registered. (Initially, nothing is
set.)
Supported PDU type Get Request, Get Next Request, Get Response, Set Request, Trap
Community Each community name can be set with 16 ASCII characters or less.
Protocol UDP/IP
UDP port number 3289
Compatible packet types Probe, Initialize, Query, Setup, Notify
HTTP version HTTP/1.1
Server Port Number 80
Supported language English
No. of possible simultaneous
connections
1