Epson UB-E04 Reference Guide

41
Appendix
Appendix
The following indicates the defaults for the UB-E04 network parameters, if they can be displayed and set
using EpsonNet Config / EpsonNet Config (Web version), and if they are displayed on the status sheet.
Ethernet and Wireless LAN Shared Settings and Browsable Items
(*) The following are the parameters that can be set for Character Code Table.
• Page 0
• Page 0, 2,16
• Page 0-5, 16-19 (GB2312)
Articles Parameters Default
EpsonNet
Config
EpsonNet
Config
(Web version)
Status
Sheet
Refer Setting Refer Setting
IP Address 192.168.192.168 Yes Yes Yes Yes Yes
Subnet Mask 255.255.255.0 Yes Yes Yes Yes Yes
Gateway Address 0.0.0.0 Yes Yes Yes Yes Yes
Acquiring the IP
Address
Manual/Auto Manual Yes Yes Yes Yes Yes
APIPA Enable/Disable Disable Yes Yes Yes Yes No
Administrator Name (max 256 characters) " " (no value) Yes Yes Yes Yes No
Location/Person (max 256 characters) " " (no value) Yes Yes Yes Yes No
Password (max 20 characters) "epson" No Yes No Yes No
Community Name 1 (read only) "public" Yes No Yes No No
Community Name 2 (max 31 characters) " " (no value) Yes Yes Yes Yes No
IP Trap1 Enable/Disable Disable No No Yes Yes No
IP Trap2 Enable/Disable Disable No No Yes Yes No
Community Name
(IP Trap #1)
(max 31 characters) " " (no value) No No Yes Yes No
Community Name
(IP Trap #2)
(max 31 characters) " " (no value) No No Yes Yes No
IP Trap #1 Address – 0.0.0.0 No No Yes Yes No
IP Trap #2 Address – 0.0.0.0 No No Yes Yes No
Socket Timeout
1 - 300 sec
0 (no timeout)
90 sec Yes Yes Yes Yes No
Time Server Status
Invalid/Success/
Synchronize/Failure
Invalid Yes No Yes No Yes
Time Server Address – 0.0.0.0 Yes Yes Yes Yes No
ePOS-print Enable/Disable Disable No No Yes Yes No
Printing Method
Impact
Impact (24pin)
Thermal (180dpi)
Thermal (203dpi)
Thermal (180dpi) No No Yes Yes No
Character Code
Table
(*) Page 0-5, 16-19 No No Yes Yes No

Epson UB-E04 Specifications

General

Brand	Epson
Model	UB-E04
Category	Computer Hardware
Language	English