Epson WF-C21000 Series - Operations on the Printer; Printing

7. Enter the user ID, enter 0 (zero) for the password, and then click OK.
e
print job is sent to the printer.
Note:
If you select Remember this password in my keychain, you can skip entering the user ID and password in the future.
Operations on the Printer
You print or delete the print jobs sent to the printer.
Printing
Note:
You can print directly by selecting Direct Print in Print Methods from Epson Print Admin Serverless Settings in the
printer driver.
1. Log in.
When Pull Printing is set, log in to the printer you want to print from.
When you log in, the print job list is displayed on the control panel.
Depending on your system administrator setting, all jobs are selected by default in the print job list at log in.
Note:
When the number of print jobs stored in the printer reaches the maximum, no more print jobs can be accepted and a
message is displayed.
Print jobs remain in the spooler on the computer. When the stored print jobs are printed and space becomes available,
these spooled jobs are stored and printed one
aer
another.
2. Select the job that you want to print from the print job list.
Tap
to check the status of the selected print job and to change the number of copies, if necessary.
How to Use
Authenticated Printing
19