Epson WF-C21000 Series - Authentication Methods; Preparing for Use; Registering an Authentication Card

Authentication Methods
e authentication method is set up by the system administrator, and the screen on the control panel is displayed
accordingly. e available authentication methods are as follows.
❏ user ID and password
❏ user ID
❏ ID number
❏ authentication card (if an authentication device is connected)
Preparing for Use
You need to prepare to use Epson Print Admin Serverless. Preparation is dierent depending on the authentication
method and whether an authentication device is used.
Registering an Authentication Card
If you are using an authentication card for Epson Print Admin Serverless, you need to register the user
authentication card.
Note:
❏ e card may have been registered by your system administrator already. For more information, follow the instructions
given by your system administrator.
❏ For printers connected by wireless LAN that have entered sleep mode (energy saving mode), it may take some time to
recognize the authentication card. You may need to hold your card over the authentication device again.
1. Hold the authentication card over the authentication card reader.
e
screen for entering the user ID and password is displayed.
How to Use
Authentication Methods
7