Epson WorkForce 320 Quick Setup Instructions

Start Here
3 Squeeze the edge guide as you slide it all the way to the
left.
Tip: If the clear plastic feeder guard is in the way, move it
forward.
4 Load letter- or A4-size paper against the right edge and
behind the tab, with the printable side face up.
5 Slide the edge guide over.
6
Connect the phone cord
To fax, connect the included phone cord to a telephone wall
jack and to the LINE port on your product. To connect a
telephone or answering machine, see the Quick Guide.
Note: If you’re connecting to a DSL phone line, you must use a DSL
filter or you won’t be able to fax. Contact your DSL provider for the
necessary filter.
Read these instructions before using your product.
1
Unpack
French control
panel stickers
(included for
Canada only)Power cordPhone cord
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1 Connect the power cable.
Caution: Do not connect to your computer yet.
2 Press the On button.
3
Select settings
1 To select English as your language, press OK.
(If you want to change the language, press or to
select it, then press OK.)
2 Select your Country/Region and press OK.
3 Select the current Daylight Saving Time setting (Winter
or Summer) and press OK.
4 Select the Date format and press OK.
5 Press the number keys to enter the Date and press OK.
6 Select the Time format (12h or 24h) and press OK.
7 Press the number keys to enter the Time. Then press
or to select AM or PM, if necessary.
8 Press OK.
4
Install ink cartridges
Note: Do not load paper yet.
1 Lift up the scanner.
2 Open the cartridge cover.
3 Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals or the cartridges may
leak.
5 Insert the cartridges in the holder for each color.
6 Press each cartridge down until it clicks.
7 Close the cartridge cover. Press down until it clicks.
8 Lower the scanner.
9 Press the OK button to charge the ink.
Priming takes about 2½ minutes.
Note: Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution: Don’t turn off the printer while it is priming or you’ll
waste ink.
5
Load paper
1 Open the paper support and pull up the extensions.
2 Pull out the output tray extensions and raise the stopper.
*411867400*
*411867400*
WorkForce
®
320 Series

Epson WorkForce 320 Specifications

General

Safety	UL60950, CSA C22.2 No. 60950 EMI FCC Part 15 subpart B class B, CAN/CSA-CEI/IEC CISPR 22 class B
Color scanning	Yes
Dimensions (WxDxH)	459 x 541 x 302 mm
All-in-one functions	Copy, Fax, Print, Scan
Connectivity technology	Wired & Wireless
Hardware scan resolution	1200 x 2400 DPI
Color all-in-one functions	copy, print, scan
Compatible operating systems	- Windows 7, Windows Vista, Windows XP, Windows XP x64 - Mac5 OS X, 10.4.11, 10.5.8 and 10.6.x
Duplex printing	No
Print technology	Inkjet
Maximum resolution	5760 x 1440 DPI
Time to first page (black, normal)	- s
Print speed (black, normal quality, A4/US Letter)	4.3 ppm
Print speed (color, normal quality, A4/US Letter)	2.2 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	- pages per month
Number of print cartridges	4
Maximum copy resolution	- DPI
Maximum number of copies	99 copies
Scanner type	Flatbed scanner
Input color depth	48 bit
Output color depth	24 bit
Maximum scan resolution	9600 x 9600 DPI
Optical scanning resolution	1200 x 1200 DPI
Faxing	Mono faxing
Fax memory	180 pages
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Fax speed dialing (max numbers)	60
Total input capacity	- sheets
Maximum input capacity	100 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Photo paper, Plain paper
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Photo paper sizes (imperial)	4x6, 5x7, 8x10, 3.5x5 \
Borderless printing media sizes	A4
Display	LCD
Market positioning	Home & office
Display number of lines	2 lines
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Sound power level (standby)	38 dB
AC input voltage	100 - 120 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (average operating)	10 W
Storage temperature (T-T)	20 - 40 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR