Replacing Ink Cartridges 19
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1. Turn on the printer.
If a cartridge is expended, the ink light on the control panel stays on. You
must replace the cartridge to be able to print.
If the ink light is flashing, a cartridge is low on ink; replacement is
recommended.
Note:
You can also replace an ink cartridge before the ink light is on or flashing by
following the steps below.
2. Open the printer cover.
3. Press the ink button.
To Next Page
Loading...
